Svantek SV 200A User Manual

37
SV 200A User Manual
Note: Unlike Calibration procedure, system check does not change the calibration factor of the
instrument.
The electrostatic actuator generates 1 kHz tone equivalent to sound pressure level of 94 dB (re. 20 μPa).
It can be turned on or off and programmed remotely by the user:
- via SvanNET Web service, in the Status tool (see Chapter 8.3) or
- via SVAN PC++ Remote Control software, in the Live Results window (see Chapter 9.6).
Auto System Check feature of SV 200A enables configuring and scheduling automatic check of the
instrument:
- via SvanNET Web service, in the Automatic system check panel (see Chapter 8.4.1) or
- via SvanPC++ Remote Control software, in the Automatic system check panel (see
Chapter 9.8.11).

Svantek SV 200A Specifications

General

Brand	Svantek
Model	SV 200A
Category	Measuring Instruments
Language	English