Sysmac CQM1 User Manual

120
Non-fatal Error Check Although the PC will continue operating during non-fatal errors, the cause of the
error should be determined and removed as quickly as possible to ensure
proper operation. It may to necessary to stop PC operation to remove certain
non-fatal errors.
Identify the error (See page 115.),
eliminate its cause, and clear the
error.
ERR/ALM indicator flashing.
Is a non-fatal error
indicated?
Is the ERR/ALM indi-
cator flashing?
Replace the CPU Unit.
End
Determine the cause of the error
with a Peripheral Device.
No
Yes
Flashing
Not lit
Troubleshooting Flowcharts
Section 4-6

Sysmac CQM1 Specifications

General

Manufacturer	Omron
Operating Temperature	0 to 55°C
Humidity	10 to 90% RH (non-condensing)
Power Supply	100 to 240 VAC or 24 VDC (depending on model)
Programming Language	Ladder Diagram, Instruction List
Communication Ports	RS-232C
Expansion	Expansion I/O units available
Analog I/O	Available via expansion units
Instruction Set	Basic and advanced instructions
Vibration Resistance	10 to 57 Hz, 0.075 mm amplitude