3-2SectionSSS Capabilities
80
Group DescriptionName
DM
Transfer
PC —> Computer
(C-series PCs only)
Retrieves PC DM data to the system work area.
Transfer
Computer—>PC
(C-series PCs only)
Writes system work area DM data to the PC.
Transfer
Verify
(C-series PCs only)
Compares DM data between the system work area and PC.
Monitor
(C-series PCs only)
Used to monitor DM area contents in the PC.
Go To Page
(C-series PCs only)
Reads a specified page from the DM list of the DM area in the system work area or
PC.
Read DM Addr
(CVM1 PCs only)
Reads the contents of the DM area, including the specified DM address, from the
work disk and displays it in the DM table.
Copy
(CVM1 PCs only)
Copies multiple, consecutive words of DM data to a specified destination DM
address.
Fill
(CVM1 PCs only)
Places a specified value into multiple, consecutive words of the DM area. Filling
with 0000 clears the DM words.
Print
(CVM1 PCs only)
Prints multiple, consecutive words of DM data.
HEX <-> ASCII
(CVM1 PCs only)
Specified inputs using hexadecimal or ASCII. The mode set will be displayed in the
top-right of the screen.
Switch Bank
Number
(CVM1 PCs only)
Switches editing between the standard DM and EM banks.
Save DM data
(CVM1 PCs only)
Saves the DM data from the work disk to the data disk or hard disk.
Retrieve DM data
(CVM1 PCs only)
Retrieves the DM data on the data disk or hard disk to the work disk.
Transfer DM
(CVM1 PCs only)
Transfers and compares DM data between the SSS and the PC.
I/O Table
Transfer I/O Table Transfers and compares the I/O table data between the computer and PC.
Create I/O Table Registers into the PC the I/O Units mounted on the PC and then assigns the words
to the Units.
Verify I/O Table Compares the I/O table registered in the PC against the I/O Units actually mounted
on the PC.
Clear I/O Table
(CVM1 PCs only)
Deletes the I/O tables (C200H and C200HS only)
To Next Page
Loading...
Need help?
General