Tally Dascom 2600 - Chapter 3 Part Replacements

Tally Dascom 2600 2610
12
Chapter 3 Part Replacements
This chapter provides the necessary information about disassembly and
assembly of the printer components and parts.
 Unless specifically specified, reverse the disassembling procedures to
assemble the parts.
 Pay attention to the locations of latches, lubrication and the
disassembling procedures.
 Take precaution of electrostatic. Avoid touching the electronic
components unless you are discharged on a protective ground.
 The ‘left’ and ‘right’ in this chapter refer to the view by an operator
standing in front of the printer.
Recommended Tools
■
J-shape hook
■ Medium size Philips head “+” screwdriver
■
Small size flat-bladed “-” screwdriver
■
A pair of pliers
■
Thickness gauge
* There is no difference between "empty" and "filled" bullets in the drawings.
"Filled" bullets are used in complicated background for a better viewing.
Disconnect the power cord before taking the printer apart.