Tally Dascom 2600 - Error Indications on LCD

Tally Dascom 2600 2610
77
6.3.4 Error Indications on LCD
LCD
Messages
Meaning
Eject error
The printer cannot eject the paper/advance it to park position.
Hardware alarm
Internal hardware error, contact your dealer or service technician.
Head hot
The print head is too hot. The printer will reduce its print speed.
Initializing
This message appears during the printer ’s initializing phase after
switching on the printer.
Load error
The printer fails to load the paper.
Loading default
Factory defined parameters will be reloaded in all available menus after
switching on the printer.
Load paper
from
The printer has detected paper end during operation/printer was
switched on with no paper loaded.
Parity error
A parity error during data transmission is indicated.
Park position
Printer was switched on with no paper loaded.
Press any key
The user is requested to press any key.
Self-test
After power-on, the printer executes a short hardware self-test.
Tear paper off
The user is requested to tear off paper which has been advanced to the
tear.
Switch paper
lever
Choose correct paper path. Turn paper lever.