Tally Dascom 2600 - Unload the Mechanism

Tally Dascom 2600 2610
17
3.1.5 Unload the Mechanism
1) Unload the Mechanism

The mechanism sits on the 4 rubber Suspensions on the 4 corners. Use a long
J-hook to pull out each suspension. →①

Vertically lift up the whole mechanism by both hands and place it on a stable
surface. →②
When restore the mechanism back on to the Lower Housing, make sure
the mechanism properly sits on the 4 suspensions marked by
. Then
fasten the Suspensions onto the mechanism on the 4 corners.