Tally Dascom 2810 - List of Available Control Codes

Options and accessories User Guide
List of available control codes
The following table shows sequences marked by a 3 if they are available in the
various emulations. The MTPL sequences can be used within all emulation
modes. The corresponding sequences are marked by a .
If you want to know more about control codes, we recommend our
Programmer’s Application Manual on this CD-ROM.
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170 Code Function
   
<BEL> Signal tone
    
<BS> Control character BS (Backspace)
 
<CAN> Deleting a data line
    
<CR> Control character CR (Carriage return)

<CSI> Start character for MTPL sequences, corr. ESC [
 
<DC1> Selecting the printer
 
<DC2>
Condensed printing OFF (set by <Sl> or
<ESC><Sl>)
 
<DC3> Deselecting the printer
 
<DC4>
Double-wide printing OFF (set by <SO> or
<ESC><SO>)
    
<DEL> Delete line. Epson: Delete last character
    
<ESC> Start character for programming sequence
   
<ESC>!<n> Print mode selection
  
<ESC># Bit 8 = unchanged
 
<ESC>$<n1><n2> Perform absolute horizontal step
 
<ESC>%<0><0> Select ROM character generator
 
<ESC>%<1><0> Select download generator
    
<ESC>%1<n1><n2> Graphics print with 180 dpi/HQ
    
<ESC>%2<n1><n2> Graphics print with 360 dpi/HQ
    
<ESC>%3<n1> <n2> Graphics print with 60 dpi
    
<ESC>%4<n1> <n2> Graphics print with 120 dpi
    
<ESC>%5<n1> <n2> Graphics print with 80 dpi
    
<ESC>%7<n1> <n2> Graphics print with 240 dpi
    
<ESC>%8<n1> <n2> Graphics print with 72 dpi
    
<ESC>%9<n1><n2> Graphics print with 90 dpi
 
<ESC>&<s><x><y>.. Define download character
    
<ESC>(& Character set ISO 8859-2
    
<ESC>(* Character set ISO 8859-5
    
<ESC>(+ Character set ISO 8859-1 SAP
    
<ESC>(. Character set ISO 8859-9
140