User Guide Options and accessories
Setting Gateway address (Gateway)
Input of the Gateway address of the printer.
Press Gateway (3) key.
This menu level offers the possibility to set the IP address,
which is divided into four digit groups (octet 1 to 4). You
can activate octet 3 and 4 by pressing the Next (2) key.
Press OCTET 1 (1) key.
Use the < (2) or > (3) key to select the desired digit.
Setting Options: 0 to 255
Default Setting: 0
Confirm the setting by pressing the Set key (1).
Set the remaining three digit groups in the same way.
Press the Next key (4) to access the next group of parameters.
Setting IP address (IPv4 Addr)
Input of the IP address of the printer.
Press IPv4 Addr (3) key.
This menu level offers the possibility to set the IP address,
which is divided into four digit groups (octet 1 to 4). You
can activate octet 3 and 4 by pressing the Next (2) key.
Press OCTET 1 (1) key.
Use the < (2) or > (3) key to select the desired digit.
Setting Options: 0 to 255
Default Setting: 0
Confirm the setting by pressing the Set key (1).
Set the remaining three digit groups in the same way.
69
To Next Page
Loading...
