Options and accessories User Guide
Advanced settings
In the advanced menu, there are other settings available besides the test
functions.
► With the function PMS you have the possibility of activating the automatic
paper motion sensor (PMS) in case of a paper jam.
► With the functon Forml you can adjust the form length.
► The function AGA switches the automatic printhead gap function on or off.
► You can also select adjustments which facilitate handling paper which may
cause problems in printing due to its structure (Paphand).
► The CX-bid menu option controls the bidirectionality of the parallel interface.
► With the function Wrap, you can set line wrap and with the function Sound
beep at paper end.
► The function JobCtrl activates the PJL functionality.
► The function Pap.back allows printing on paper with a dark back.
► With the function GrSpeed, you can select an improved graphic speed.
► You can use the HvyForm function to set the print head to print the same line
twice at double strike force in order to ensure that copy paper produces
optimum results even if it has a faint copying effect.
► The APW function can be used to activate the automatic paper width
detection feature to prevent the printer from printing beyond the paper edge.
► The AED menu option only appears, if a cut device is installed. It corrects
possible inaccuracies of the paper positioning at the tear edge if the paper
path is changed after a cutting action.
► With the SerialN function, you have the possibility to change the serial
number of the printer.
► With the AssetN function, you have the possibility to change the asset
number of the printer.
► The Ignore function allows to ignore any character (to be defined in
IgnoreChr).
► The IgnoreChr function set the character to be ignored as a decimal number.
94
To Next Page
Loading...
