Options and accessories User Guide
Options and accessories
Options
The following options can be ordered for your printer.
Tractor 2, front
The push tractor is suitable for fanfold paper. You can use paper formats with a
width in the range from 76 to 406 mm; you can set any intermediate format.
Part no.: 061052
Autocut facility
An additional module for automatic cutting.
Part no.: 062661
Printer pedestal
A cabinet to be used as a printer stand and for storing fanfold paper stacks.
Part no.: 062690
Basket
Part no.: 062833
Interface modules
The following interface modules are available.
Name Part no.
Combi parallel and serial interface module, RS-232C,
Sub D 9 pin-f connector
070566
Ethernet interface module 10/100 Mb/s, compatible to
TallyCom Pocket-I/F
043886
Ethernet interface module 10/100 IPDS 043888
Ethernet interface module 10/100 SCS 043887
Optional firmware
On request.
166
To Next Page
Loading...
