User Guide Options and accessories
Settings for interfaces (I/O)
In this parameter group, you can choose various settings for the printer
interfaces. See also Interfaces.
Press I/O (3) key.
Serial interface (Serial)
This parameter group only is valid, if an optional serial interface module is
installed.
To ensure the proper functioning of serial data transfers, the serial settings
of the printer and computer (host) must coincide.
Depending on your printer model the serial interface is already installed or
it is available as an option.
Press Serial (2) key.
Data transmssion rate (Baud)
Selects the data transmission rate (baud rate) (baud = bit per second).
Press Baud (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 600, 1200, 2400, 4800, 9600, 19200
Default Setting: 9600
Printer and computer must have the
same baud rate.
Confirm the setting by pressing the Set key (1).
63
To Next Page
Loading...
