Tally Dascom 2810 - Page 141

Options and accessories User Guide
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170 Code Function
    
<ESC>*MI>F Assign character set G2
  
<ESC>-<n> Underlining ON/OFF

<ESC>/<m> Select vertical tab channels

<ESC>. Printing raster graphics
 
<ESC>: Condensed printing 12 cpi ON
 
<ESC>:<0><n><m> Copy ROM character set
 
<ESC>< Unidirectional printing for 1 line
 
<ESC>= Set bit 8 = 0
 
<ESC>=<C1><C2>... Load font/character set
 
<ESC>> Set bit 8 = 1
 
<ESC>?<s><n> Reload a graphics mode
 
<ESC>@ Initialize printer
    
<ESC>[ MTPL start character for programming sequence
    
<ESC>[$A<n1><n2> Fast graphic print with 90 dpi
    
<ESC>[$B<n1><n2> Fast graphic print with 180 dpi
    
<ESC>[+0<u> Compmode = On
    
<ESC>[+1<u> Compmpde = Off
    
<ESC>[:y Right justification and centering OFF
    
<ESC>[$A<n1><n2> Fast graphic print 90 dpi vertical
    
<ESC>[$B<n1><n2> Fast graphic print 180 dpi vertical
    
<ESC>[=z Bold ON
    
<ESC>[>z Bold OFF
    
<ESC>[?1~ MTPL command set
    
<ESC>[?10~ Barcode interpretation OFF
    
<ESC>[?11~ Start barcode interpretation
    
<ESC>[?4~ MTPL + IBM Proprinter-24 command set
    
<ESC>[?50h Selecting character sets with 256 characters
    
<ESC>[?50l Selecting character sets with 94 characters
   
<ESC>[?51h Proportional fonts automatic NLQ and LQ
   
<ESC>[?51l Proportional fonts in draft mode possible (default)
    
<ESC>[?52h
Font selection (ESC[10...19m]) possible only for NLQ and LQ
    
<ESC>[?52l
Font selection (ESC[10...19m]) Draft possible (default)
    
<ESC>[?53h Extended character set
    
<ESC>[?53l Standard character set
    
<ESC>[?6~ MTPL + EPSON LQ command set
    
<ESC>[?7h Line overrun = CR + LF
    
<ESC>[?7l
Line overrun = Truncating data outside of the printing area
142