Tally Dascom 2810 - Page 147

Options and accessories User Guide
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170 Code Function
 
<ESC><EM>4 Select single sheet operation
 
<ESC><EM>R Print page
   
<ESC>F Bold OFF
 
<ESC>g Set character pitch to 15 cpi
   
<ESC>G Set double stroke
   
<ESC>H Reset double stroke

<ESC>H Set horizontal tab at current printhead position
 
<ESC>I<n> n = 0, 8: Draft; n = 4, 12, 20: Draft DLL/n = 0, 8: HS;
n = 4, 12, 20: HS DLL
 
<ESC>j<n> Single line feed back n/180 inch
 
<ESC>j Set printer to Off Line
  
<ESC>J<n> Single line feed n/180 inch

<ESC>J<n> Single line feed n/216 inch
 
<ESC>k<n> Select font
   
<ESC>K<n1> <n2> Set graphics print to 60 dpi
 
<ESC>l<n> Set left margin
 
<ESC>l<n> Select print mode
   
<ESC>L<n1> <n2> Set graphics print to 120 dpi
 
<ESC>M Set character pitch to 12 cpi (Elite)
    
<ESC>n Character generator LS2
  
<ESC>N<n> Set perforation skip
    
<ESC>o Character generator LSü
   
<ESC>O Reset perforation skip
 
<ESC>p<n> Proportional font ON/OFF
 
<ESC>P Set character pitch to 10 cpi (Pica)
 
<ESC>P<n> Proportional font ON/OFF
 
<ESC>Q<35> Deselect printer
 
<ESC>Q<n> Set right margin
 
<ESC>r<n> Select colour (reserved)
 
<ESC>R Reset all tabs
 
<ESC>R<n> Select national character set
   
<ESC>S<n> Superscript or subscript ON
   
<ESC><SI> Condensed printing 17.1 cpi ON
   
<ESC><SO> Double-wide printing ON
 
<ESC><SP><n> Set character spacing
 
<ESC>t<n> Select character set
   
<ESC>T Superscript or subscript OFF
   
<ESC>U<n> Unidirectional print ON/OFF
148