Options and accessories User Guide
Release the coloured latch lever of
the lefthand tractor and align the
tractor so that the first printing position
on the paper matches the X mark on
the printer housing.
Lock the coloured lever again.
Place fanfold paper into the left-hand
tractor.
Open the coloured latch lever of the
right-hand tractor and align it to the
paper width.
Insert the fanfold paper into the right-
hand tractor.
Make sure that it is inserted by the
same length as on the left-hand tractor
in order to avoid any paper jam.
Close the tractor flap and lock the
tractor by turning the tractor lever to
the rear.
Do not tension the paper excessively to avoid tearing the perforation holes;
do not allow excessive slack since in this case the paper will bulge and
there may be problems in the feeding process.
34
To Next Page
Loading...
