Tektronix DSA70000D Series - Select the Bus Display Components; Select the Bus Decode Method

Bus setups Select the bus display components
Select the b us display components
From the Bus Setup window, select the Display tab.
To use
Scroll through the Bus list and select the bus to configure.
Click a component to depict the data from logic waveforms as a waveform, as a busform, or as both.
Behavior
Waveform causes the instrument to display only the digital traces of the channels in the bus.
Busform causes the instrument to display only the decoded busform.
Both causes the instrument to display waveforms and a busform.
What do you want to do next?
Learn m ore about bus configuration. (see page 148)
Learn about bus setups. (see page 95)
Learn about digital setups. (see page 87)
Select the bus decode method
From the Bus Setup window, select the Display tab.
To use
Scroll through the Bus list and select the bus to configure.
Click the Busform Decode method to interpret and display the data from a bus as numeric.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 151