SPG600 & SPG300 Sync Pulse Generators Service Manual 10-1
Mechanical Parts List
This section contains a list of the replaceable modules for the sync pulse generator.
Use this list to identify and order replacement parts.
Parts Ordering Information
Replacement parts are available through your local Tektronix field office or
representative.
Change to Tektronix products are sometimes made to accommodate improved
components as they become available and to give you the benefit of the latest
improvements. Therefore, when ordering parts, it is important to include the
following information in your order.
Part number (see Part Number Revision Level below)
Instrument type or model number
Instrument serial number
Instrument modification number, if applicable
If you order a part that has been replaced with a different or improved part, your
local Tektronix field office or representative will contact you concerning any
change in part number.
Part Number Revision
Level
Tektronix part numbers contain two digits that show the revision level of the part.
For most parts in this manual, you will find the letters XX in place of the revision
level number.
When you order parts, Tektronix will provide you with the most current part for
your product type, serial number, and modification (if applicable). At the time of
your order, Tektronix will determine the part number revision level needed for
your product, based on the information you provide.
Part Number Revision Level Revision Level may show as XX
670-7918-03 670-7918-XX
To Next Page
Loading...
