Operating Basics
TDS5000B Series Quick Start User Manual
35
Fast Acquisitions mode can display waveform phenomena at an intensity that reflects the rate of occurrence.
Fast XY and XYZ modes also provide intensity information by accepting continuous, nontriggere d data from the
input channels. Turn Fast Acquisitions on to acquire up to 100,000 waveforms per second.
1. To start Fast Acquisition, do one
of the following:
H Push the front-panel FastAcq
button.
H Select H oriz/Acq > Fast
Acquisitions.
1
2. Adjust the intensity to optimize
the color grading of the signal
that you wa nt to analyze by doing
one of the following:
H Use the front-pa nel
INTENSITY knob.
H Select Display >
Appearance..., and t hen
select FastAcq/WfmDB.Use
the multipurpose knobs to
change the intensity.
2
To Next Page
Loading...
