October 2017 RiverPro and RioPro ADCP Guide
Page 74
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Table 8: RiverPro/RioPro Specifications
Power
Battery (inside boat) 12V, 7A-hr lead acid gel cell
RiverPro/RioPro DC Input 10.5 to 18 VDC
Power consumption 1.5W typical
Battery capacity > 40 hrs continuous operation
Standard Sensors
Temperature (mounted on transducer)
Range:
-5° to 45° C
Accuracy:
± 0.5° C
Resolution:
0.01°
Tilt (ISM)
Range:
±90°
Accuracy:
0.3° for combined tilt < ±70°
Resolution:
0.02°
Compass (includes field calibration feature)
Range:
0 to 360°
Accuracy:
±1°
5
Resolution:
0.01°
Maximum tilt:
± 70°
GPS (Embedded)
Accuracy:
3m Horizontal
5m vertical
0.01m/s Velocity (nominal)
Resolution: 20cm
1 Distance measured from the center of the first cell to the transducer surface
2 Actual range depends on temperature and suspended solids concentration
3 For beam-averaged depth data
4 Assumes uniform water temperature and salinity profile
5 For combined tilt <+/-70° and dip angle <70°
Outline Installation Drawing
The following drawings show the standard RiverPro/RioPro dimensions and weights.
Table 9: Outline Installation Drawings
Description Drawing #
1200 kHz RiverPro 96B-6060
1200 kHz RioPro 967-6150
Outline Installation Drawings are subject to change without notice. Verify you have the latest
version of the drawing by contacting TRDI before building mounts or other hardware.
To Next Page
Loading...
