Teledyne RIVERPRO - PD0 Output Data Format

October 2017 RiverPro and RioPro ADCP Guide
Page 124
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Water Profiling Commands
The following commands define the criteria used to collect the water-profile data.
Standard Water Profiling Commands
The available water profiling commands are different for each water mode. The commands listed below
show the commands for each water mode. The added commands are highlighted.
>wm3
>w?
Available Commands:
WC 064,080,096 ---------- Correlation Threshold [0-255]
WD 1110000001 ----------- Data Out {v;c;a;p;s;*;*;*;*;m}
WM 0003 ----------------- Water Profiling Mode [2,3,12]
W? ---------------------- Display W-Command Menu
Manual Mode Water Profiling WM2 and WM12 are feature upgrades for RiverPro/RioPro
systems (see Feature Upgrades). This upgrade adds the following highlighted commands.
>wm2
>w?
Available Commands:
WC 064,080,096 ---------- Correlation Threshold [0-255]
WD 1110000001 ----------- Data Out {v;c;a;p;s;*;*;*;*;m}
WF 0016 ----------------- Blanking Distance (cm) [0-500]
WM 0002 ----------------- Water Profiling Mode [2,3,12]
WN 200 ------------------ Number of Bins [1-200]
WP 001 ------------------ Number of Pings [1-999]
WS 0005 ----------------- Bin Size (cm) [2-500]
WV 0250 ----------------- Ambiguity Velocity (cm/s)
W? ---------------------- Display W-Command Menu
>wm12
>W?
Available Commands:
WC 064,080,096 ---------- Correlation Threshold [0-255]
WD 1110000001 ----------- Data Out {v;c;a;p;s;*;*;*;*;m}
WF 0016 ----------------- Blanking Distance (cm) [0-500]
WM 0012 ----------------- Water Profiling Mode [2,3,12]
WN 200 ------------------ Number of Bins [1-200]
WO 001 ------------------ Number of SubPings [1-999]
WP 001 ------------------ Number of Pings [1-999]
WS 0005 ----------------- Bin Size (cm) [1-500]
WV 0250 ----------------- Ambiguity Velocity (cm/s)
W? ---------------------- Display W-Command Menu