Teledyne RIVERPRO - ZG - Vertical Beam Gain; ZM - Vertical Beam Profile Mode

RiverPro and RioPro ADCP Guide October 2017
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 119
SI – Internal NMEA Menu
Purpose Used for Internal GPS status and diagnostic information.
Format SIn
Range n = 0, 1, 2, 10, -1, 11, 20, 30
Default SI1
Recommended Setting. Use as needed.
Description Use the SI command to retrieve Internal GPS status and diagnostic information. The
baud rate is fixed to 115200.
Example See below
>si0
Internal GPS status: IDLE, baud option 8
Baud rate 115200(8)
Usage: SI <option>
Options:
0 help
1 status
2 toggle diagnostics
10 detect baud now
-1 disable
11 enable
20 message list sub-menu
30 set device baud to 115200
>
SZ – Sensors Installed
Purpose Determines what sensors are installed and detected.
Format SZ?
Default N/A
Recommended Setting. Use as needed.
Description Shows the sensors installed.
Example See below
>sz
CTD Not Supported!
>