AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14
ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved page35of233
D – Dial
Note: for backwards compatibility with landline modems modifiers “T”, ”P”,”R”,
”,”, ”W”, “!”, “@” are accepted but have no effect.
ATD><str>[;]
Issues a call to phone number which corresponding alphanumeric field is
<str>; all
available memories will search for the correct entry.
If “
;” is present a voice call is performed.
Parameter:
<str> - alphanumeric field corresponding to phone number. It must be enclosed in
quotation marks.
Note: parameter <str> is case sensitive.
Note: used character set should be the one selected with +CSCS.
ATD><mem><n>[;]
Issues a call to phone number in phonebook memory storage
<mem>, entry
location
<n> (available memories may be queried with AT+CPBS=?).
If “
;” is present a voice call is performed.
Parameters:
<mem> - phonebook memory storage;
“SM” - SIM/UICC phonebook
“FD” - SIM/USIM fixed dialing phonebook
“LD” - SIM/UICC last dialing phonebook
“MC” – Missed calls list
“RC” - Received calls list
“DC” - MT dialled calls list
“ME” - MT phonebook
“EN” - SIM/USIM (or MT) emergency number(+CPBW is not be applicable for this
storage)
“ON” - SIM (or MT) own numbers (MSI torage may be available through +CNUM
also).
“MB” - Mailbox numbers stored on SIM.
If this service is provided by the SIM (see
#MBN).
<n> - entry location; it should be in the range of locations available in the memory
used.
ATD><n>[;] Issue a call to a phone number on entry location <n> of the active phonebook
memory storage (see
+CPBS).
If “
;” is present a voice call is performed.
Parameter:
<n> - active phonebook memory storage entry location; it should be in the range of
locations available in the active phonebook memory storage.
ATDL Issues a call to the last number dialed.
ATDS=<nr>[;]
Issues a call to the number stored in the MODULE internal phonebook position
number
<nr>.
If “;” is present a voice call is performed.