Tenda V1200 - Quality of service

114
Parameter description
Parameter
Description
Protocol Type
It allows you to select the protocol type from the drop-down list.
Destination MAC Address
It specifies the destination MAC address to which the MAC filter rule applies.
Source MAC Address
It specifies the source MAC address to which the MAC filter rule applies.
Frame Direction
It specifies the direction the frame that you want to restrict.
4.6.3.3 Changing the policy from FORWARDED to BLOCKED
Step 1 Choose Advanced Setup > Security > MAC Filtering to enter the configuration page.
Step 2 Select Change checkbox.
Step 3 Click Change Policy.
----End
Verification
The policy is change to BLOCKED.
4.6.3.4 Adding a frame blocking rule
Step 1 Choose Advanced Setup > Security > MAC Filtering to enter the configuration page.
Step 2 Change the policy to BLOCKED. Refer to To change the policy from FORWARDED to
BLOCKED.
Step 3 Click Add.
Step 4 Protocol Type: Select a protocol type from the drop-down list.
Step 5 Destination MAC Address: Enter the destination MAC address apply the MAC filtering rule