Statistics 12–35
82D315~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:36 PM Printed: 10/27/05 2:53
PM Page 35 of 38
Each stat plot has a unique stat plot editor. The name of the
current stat plot (
Plot1, Plot2, or Plot3) is highlighted in the top
line of the stat plot editor. To display the stat plot editor for a
different plot, press }, ~, and | to move the cursor onto the
name in the top line, and then press Í. The stat plot editor
for the selected plot is displayed, and the selected name remains
highlighted.
PlotsOn and PlotsOff allow you to turn on or turn off stat plots
from the home screen or a program. With no plot number,
PlotsOn turns on all plots and PlotsOff turns off all plots. With
one or more plot numbers (
1, 2, and 3), PlotsOn turns on
specified plots, and
PlotsOff turns off specified plots.
PlotsOff [1,2,3]
PlotsOn [1,2,3]
Note: You also can turn on and turn off stat plots in the top line of the
Y= editor (Chapter 3).
Displaying Other
Stat Plot Editors
Turning On and
Turning Off Stat
Plots
To Next Page
Loading...
Need help?
General
