CUTTING UNIT
4157082 First Edition 8-11
8
Rifling or Tramlining
NOTE: One cutting unit width shown. Arrow indicates
direction of travel.
Rifling or tramlining is a pattern of varying cutting heights,
resulting in a wave-like cut appearance, usually due to
heavy contact points across the reel and/or bedknife.
Probable Cause Remedy
Reel and/or bedknife unevenly worn. Inspect bedknife and reel. Grind or replace as needed. (See “Reel
and Bedknife Inspection” on page 8-13.)
TN0987
To Next Page
Loading...
