Textron Jacobsen InCommand PGM 22 - Repair-Vertical Reel and Soft-Touch Brush; Vertical Reel-Disassembly

ACCESSORIES
4157082 First Edition 10-31
10
Repair—Vertical Reel and
Soft-Touch Brush
Vertical Reel—Disassembly
See Figures 10-56 through 10-59.
!
CAUTION
Figure 10-56
1. Remove screw (6), lock washer (5), and flat washer
(4).
2. Remove gear (1) and key (2) from blade roller shaft
(3).
Figure 10-57
3. Remove bearing (7) from blade roller shaft (8).
4. Loosen set screw (9) and remove jam nut (10) from
blade roller shaft (8).
Figure 10-58
5. Remove two spacers (11) from blade roller shaft (14).
6. Remove 39 blades (12) and 36 spacers (13) from
blade roller shaft (14).
Figure 10-59
7. Remove bearing (18) from blade roller shaft (15).
8. Measure and record the distance from the end of the
shaft to the face of the jam nut.
9. Loosen set screw (19) and remove jam nut (17) from
blade roller shaft (15).
10. Remove two spacers (16) from blade roller shaft (15).
To prevent personal injury and damage to cutting
edges, handle the blade assembly with extreme
care.
TN0319
1
2
3
4
5
6
TN0320
7
10
9
8
TN0321
11
12
13
14
TN0322
15
17
18
16
19