2-10 4157082 First Edition
SPECIFICATIONS AND GENERAL INFORMATION
2
Figure 2-11
Figure 2-12
3. Push the E-stop switch (1)
The engine will stop.
If engine does not stop, use engine on/off switch (2) to
stop engine, and repair the system immediately.
Operator Presence Control (OPC)
System Check
See Figures 2-13 and 2-14.
!
WARNING
The OPC system is intended to protect the operator and
others from injury by stopping the reel and drive
mechanism as soon as the operator releases the OPC
bail.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
Figure 2-13
2. Disengage the reel clutch lever (1).
!
WARNING
3. Start the engine. (Refer to Operator’s Manual.)
Does the drive mechanism engage before the
OPC bail is engaged?
YES Stop the engine immediately and repair the
system.
Figure 2-14
Never operate equipment with the Operator
Presence Control (OPC) system disconnected or
malfunctioning. Do not disconnect or bypass any
switch.
1
TN0082
TN0015
2
Never operate the engine without proper
ventilation; exhaust fumes can be fatal if inhaled.
1
TN0031
2
TN0082
3
To Next Page
Loading...
