Specifications
Table 4 Environmental and electrical requirements (meets the IEC 1010-1 international safety Standard)
Line voltages
100 - 240 VAC ±10%
50 - 60 Hz
80 VA max
Operating environment
The instrument meets the specifications on the previous
page under the following conditions after a 30-minute
warm-up period.
Ambient temperature: 5° to 35° C (41° F to 95° F)
Relative humidity – 20% - 80% RH
Storage environment
-20° C to 70° C (-4° F to 158° F) Relative humidity not to
exceed 0.040 pounds moisture per pound of dry air. Allow
instrument to adjust to room temperature for 24 hours after
taking it out of storage. Temperature should be maintained
at ±4° F. Relative humidity should be maintained to ±5%.
Altitude
From below sea level to 2000 meters (6562 feet)
For indoor use only
Installation Category II
Pollution Degree 2
1-4
To Next Page
Loading...
