Service Diagnostic Software
Port Open Error.
1. Display of the following messages indicates the following problems:
Figure 9.2 Port Open Error Message
2. Followed by:
Figure 9.3 Communication Error Message
3. Can be caused by:
a. Instrument off or cable disconnected, wrong port.
b. Instrument on, wrong port.
Figure 9.4 Communication Error Message
Error Establishing Connection
1. Can be caused by:
a. Instrument off or cable disconnected, correct port.
b. Instrument on, correct port.
c. Instrument off or cable disconnected, correct port.
9-2
To Next Page
Loading...
Need help?
General
