EasyManuals Logo

Thermo Spectronic BioMate 3 User Manual

Default Icon
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Chapter 1 Instrument Specifications
Table 1 Specifications for Spectronic GENESYS 10 and Spectronic GENESYS 10 UVscanning
spectrophotometers
1, 2
Spectronic
GENESYS 10 Vis
Spectronic
GENESYS 10 UV
Spectronic GENESYS 10
UVscanning
Spectral Bandwidth 5nm 5nm
Optical System Single beam, grating-based,
single detector
Split-beam, grating-based, dual detectors
Lamp Source; Lifetime Tungsten-halogen;
1000 hours typical
Xenon;
5 years typical
Wavelength:
Range 325 – 1100nm 190 – 1100nm
Accuracy ± 1.0nm
Repeatability ± 0.5nm
Display 320 x 240 pixel backlit LCD, 3.8” x 2.8”
Photometric:
Range 0.3 – 125%T; -0.1 – 3.0A; 0 – 9999C
Readout Absorbance, Transmittance, Concentration
Accuracy
2
0.5% OR 0.005A whichever is greater up to 2A
Noise
1mA at 0A; 2mA at 2A, peak-to-peak
Drift
2mA/hour after warm-up 1mA/hour
Stray Light
3
0.1%T at 340 and 400nm 0.1%T at 220, 340 and 400nm
Standard Interface Bi-directional RS232C Bi-directional RS232C and
parallel output in PCL
format
Cell Holder 1-position or automatic 6-position cell holder
Keypad Membrane keypad
Software Absorbance-Transmittance-Concentration, Standard
Curve, Absorbance Ratio, Absorbance Difference,
Kinetics, Survey Scan, 3-Point Net, Multiwavelength,
Performance Validation
As Sepctronic
GENESYS 10 UV but with
full-range scanning.
Scanning speed:
200-1000nm/min
Sampling interval: 1, 2, 3,
5nm
Test Storage Up to 40 sets of test parameters
Languages Software and Printout: English, French, German, Spanish, Italian (user selectable)
Internal Printer (optional) 40-column graphical
Analog output (optional) 0 – 1V for –0.3 to 2.5A Not Available
Operator’s manual: English, French, German, Spanish, Italian
Power Requirements Selected automatically; 100 – 240 Volts
Dimensions 330W x 410D x 235H mm (13” x 16” x 9”)
Weight 8 Kg (19lb)
Warranty 1 year
1
These specifications are valid only after a 30-minute warm-up period and when the required
environmental conditions are met.
2
Measured using NIST 930D filters.
3
220nm, 340nm and 400nm measurements with SPECTRONIC Standards (#333150)
1-1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thermo Spectronic BioMate 3 and is the answer not in the manual?

Thermo Spectronic BioMate 3 Specifications

General IconGeneral
BrandThermo
ModelSpectronic BioMate 3
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals