Thermo Spectronic BioMate 3 User Manual

Technical Support Bulletins
Instrument control commands
GOTO
Report the grating wavelength
GOTO x
Sets the grating wavelength.
Tungsten: 325 <= x <= 1100
Xenon: 190 <= x <= 1100
TURRET
Report the turret position
TURRET x
Move the turret to position x. 0 <= x <= 5. B or 0 selects the BLANK position
Miscellaneous commands
AMPM 0
Display times in 24 hour mode
AMPM 1
Display times in 12 hour (am/pm) mode
BEEP
Sound the error beep
CLICK
Report the keypad click state
CLICK 0
Deactivate the keypad click
CLICK 1
Activate the keypad click
DARK
Report the Internal Printer contrast
DARK x
Set the Internal Printer contrast to x (0 <= x <= 255)
HOURS
Report the number of hours the lamp has been on
ID
Report the instruments serial number 3xxYDDDUUU
INVERSE
Report the inverse LCD mode
INVERSE 0
Set normal LCD mode
INVERSE 1
Set inverse LCD mode
LANG
Report the instrument language:
English
French
German
Italian
Spanish
LANG x
Set the instrument language:
0 English
1 French
2 German
3 Italian
4 Spanish
LCD
Report the LCD contrast value
LCD x
Set the LCD contrast value. (0 <= x <= 4095)
MODEL
Report the instruments type as follows:
Spectronic GENESYS 10 Vis
Spectronic GENESYS 10 UV
Spectronic BioMate 3
Spectronic GENESYS 6
Spectronic GENESYS 10 UVscanning
Spectronic GENESYS 10 Bio
OPTIONS
Report the currently installed options as an encoded hex byte as follows:
0x01 - Automatic turret installed
0x02 - Internal printer installed
0x04 - Analog output installed
PRINTER
Report if the Internal Printer is selected
PRINTER 0
Mark the Internal Printer as not selected
PRINTER 1
Mark the Internal Printer as selected
STANDBY
Report the current standby time. 0 means that the standby function is disabled
10-2

Thermo Spectronic BioMate 3 Specifications

General

Brand	Thermo
Model	Spectronic BioMate 3
Category	Measuring Instruments
Language	English