Routine Maintenance
8. Replace the power cord.
9. Plug the instrument back in the appropriate outlet and turn on the power.
Note: If the fuse blows again, contact technical support.
Replacement parts
Catalog # Description
335916 Single Cell Platform – Included in 335900 Spectronic GENESYS 10
Visible spectrophotometer and 335902 Spectronic GENESYS 10 UV
spectrophotometer.
336028 Single Cell Holder – Accommodates 10mm test tubes, 10mm square
cuvettes, short pathlength cuvettes with spacers, and 10mm ultra-
microcell; fits on 335927 6-Position Cell Holder or 335916 Single Cell
Holder Platform.
335927 6-Position Cell Holder – Included with 335901 Spectronic
GENESYS 10 Vis and 335903 Spectronic GENESYS 10 UV
spectrophotometers.
335988 Internal Printer assembly – For the Spectronic GENESYS Series
spectrophotometers.
335980 Internal Printer assembly – For the Spectronic BioMate 3 and
Spectronic GENESYS 10 Bio spectrophotometers.
335923 Tungsten Lamp assembly – For all Spectronic GENESYS 10 Vis
spectrophotometers (all catalog numbers beginning with 335900 and
335901).
333152 Sensitized Paper – (100 sheets) for SPECTRONIC Standards
335965 Replacement Dust cover– For all Spectronic GENESYS 10 series
spectrophotometers
335954 Printer Paper – Package of 5 rolls.
269-1603xx Spectronic GENESYS 10 Bio Operator’s manual
335902-10001 Spectronic GENESYS 10 Operator’s manual
335904-10001 Spectronic BioMate 3 Operator’s manual
335901-10020 Spectronic GENESYS 10 Series Service manual
335908-10001 Spectronic GENESYS 6 Operator’s manual
335901-10040 Service Manual for the Spectronic Spectrophotometers:
GENESYS 10 Vis, GENESYS UV, GENESYS 10 UVscanning,
GENESYS 6, GENESYS 10 Bio, BioMate 3 on CD only
335971 Replacement Silicon tubing
4-7
To Next Page
Loading...
Need help?
General
