To Next Page

To Previous Page

Technical Support Bulletins

S-391 – Spectronic GENESYS 10 Series & Spectronic BioMate 3: New Display Power Supply

November 2001

REFERENCE: ECO 71598

PROBLEM:

Changes in Display and Power Supply

PRODUCT

AFFECTED:

Spectronic GENESYS 10 & BioMate 3 models with serial number ≥ ###D260###

have been manufactured with the new display and Power Supply

APPLIES TO:

Repair at customer site Repair at Depot

DISPLAY:

Whenever a Display (either the older-style Hantronix with black wires and the

13-pin connector, or the newer-style EDT with white wires and the14-pin

connector) needs to be replaced, order the 335901-657S Display Kit.

Please note that the 335901-657S Display requires software revision (1.103

for the Spectronic GENESYS 10, and 1.001 for the Spectronic BioMate 3). If

the unit has software of a lower revision, upgrade to the current revision (see

TSB S-400).

POWER SUPPLY:

If an older-style Power Supply (Shindengen) needs to be replaced, order the

335901-653S TPI Power Supply Kit.

If a newer-style Power Supply (TPI) needs to be replaced, order the 335901-656 TPI

Power Supply.

11-4

Thermo Spectronic BioMate 3 User Manual

Questions and Answers: