Peer state ckts pkts_tx pkts_rx pkts_enq connect time
172.17.6.221 CONNECTED 0 2 2 0 Thu Jan 1 04:50:13 1970
In order to display the capabilities of the local peer the following command is used:
show dlsw capabilities local
root@Imola > show dlsw capabilities local
Capabilities for peer: 172.17.6.221
Vendor Id : 5AB00
DLSW version : 1
DLSW release : 0
init pacing window : 20
tcp connections : 1
supported saps : all
MAC Address exclusivity : 0
In the same way, in order to display the capabilities of the remote peer, the following command is
used:
show dlsw capabilities
root@Imola > show dlsw capabilities
Capabilities for peer: 10.250.255.1
Vendor Id : 00C
DLSW version : 1
DLSW release : 0
init pacing window : 20
tcp connections : 1
supported saps : all
MAC Address exclusivity : 1
MAC Address list : [ 400016702000 ffffffffffff ]
version string : Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(1), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 27-Apr-01 03:19 by cmong
In order to display the circuits established between the local peer and its remote partner, the
following command is used:
show dlsw circuits
root@Imola > show dlsw circuits
Id local addr(lsap) remote addr(rsap) state connect time
0 00:a0:d1:be:4c:a1(4 ) 02:00:68:0e:04:00(4 ) CONNECTED Thu Jan 1 02:36:56 1970
Flow Control Tx CW:20 Permitted:37 Rx CW:20 Granted:37
Bytes:85/42 Info Frames:3/3
XID-frames:1/0 UInfo Frames:0/0
Total number of circuits connected = 1
To Next Page
Loading...
Need help?
General
