Toshiba B-EX6 Series - Auto Self Diag. Print Printout

5. SYSTEM MODE EO18-33031
5.4 DIAGNOSTIC
5-23
5.4.2.1 Auto Self Diag. Print Printout
Print condition:
Label length 120 mm
Print method User setting
Sensor type None
Speed (203 dpi) B-EX6T1/T3-G 5 ips
(305 dpi) B-EX6T1/T3-T 5 ips
Issuing number 1
Issuing mode User setting
Others Rewinder motor not activated.
PROGRAM B-EX6T1-T
MAIN XXXXXXXXX K1.0 :F100
BOOT XXXXXXXXX C1.0B :0000
WMON XXXXXXXXX V1.0 :6100
FONT AE00
KANJI NONE :0000
NONE :0000
EEPROM 256B
SDRAM 32MB
SENSOR1 00000000,00000111
SENSOR2 [H]23 ﾟ C [A]22 ﾟ C
[R]4.2V [T]2.5V [E]0.6V
PE LV. [R]1.8V [T]2.5V
M THRE. [R]1.8V [T]2.5V
HEAD [RANK]7 305DPI
LAN MAC 11-22-33-44-55-66
EXP.I/O NG
EX.232C NG
SIO NG(0111)
RFID OK #00RV972 (EU0) R01
WLAN OK Ver1.1.3
MAC 00-11-22-33-44-55
RTC NG
USB MEMORY NG
BASIC M Z-EX4T1—M13 V1.3:02DC
BASIC S Z-EX4T1—S11 V1.1:BF1E
NOTE:
“°” (degree) of “xx°C” may not be printed correctly,
depend on the type of code page.