Toshiba B-EX6 Series - 5.8 RAM Clear Functions

5. SYSTEM MODE EM18-33031
5.8 RAM CLEAR
5-54
5.8 RAM CLEAR
Contents of RAM CLEAR menu
Menu item
<8>RAM CLEAR
NO RAM CLEAR
MAINTE.CNT CLEAR
PARAMETER CLEAR
5.8.1 NO RAM CLEAR
This option is provided for users who access this menu by mistake, and intended to exit from the RAM
clear menu without performing any RAM clear.
5.8.2 MAINTE.CNT CLEAR
The following maintenance counter data is cleared.
・ ALL COUNTER
 FEED
 PRINT
 CUT
 OTHER
NOTES:
1. Maintenance counter data to be cleared and the initial values after maintenance counter clear
Maintenance counter item Initial value
Parameter and cleared items
ALL
COUNTER
FEED PRINT CUT OTHER
 Label distance covered 0 km Cleared Cleared
 Print distance 0 km Cleared Cleared
 Cut count 0 Cleared Cleared
 Head up/down count 0 Cleared Cleared
 Ribbon motor drive time 0 hours Cleared Cleared
 Head-up solenoid driver time 0 hours Cleared Cleared
 RS-232C hardware error count 0 Cleared Cleared
 System error count 0 Cleared Cleared
 Momentary power interruption count 0 Cleared Cleared