Toshiba B-EX6 Series - Lan;Wlan; Ip Address; Subnet Mask; Gateway Address

5. SYSTEM MODE EM18-33031
5.8 RAM CLEAR
5-59
CONTROL Transmission control method XON+READY AUTO
<< CENTRO >>
Item Description Initial value
ACK/BUSY ACK/BUSY timing Rising edge
INPUT PRIME Whether to reset the printer when the
INIT signal is ON
ON
PLUG & PLAY Plug and play OFF
<< LAN/WLAN >>
Item Description Initial value
LAN/WLAN Selection of LAN type AUTO
SNMP SNMP ON
IP ADDRESS Printer IP address Not cleared.
SUBNET MASK Subnet mask Not cleared.
GATEWAY ADDRESS Gateway address Not cleared.
SOCKET PORT Whether to enable
socket communication
QM TYPE
CN TYPE
Not cleared.
JA TYPE ON
DHCP DHCP ON
DHCP CLIENT ID DHCP ID Not cleared.
DHCP HOST NAME DHCP host name Not cleared.
CONNECTION MODE WLAN: Communication mode INFRASTRUCTURE
ESS ID WLAN: ESS ID TOSHIBATEC
ENCRYPTION WLAN: Encryption OFF
WPA MODE WLAN: WPA OFF
AUTHENTICATION WLAN: Authentication method OPEN
802.1X SUPPLICANT WLAN: Authentication method OFF
DEFAULT KEY WLAN: Encryption key 1
802.11bgn CHANNEL WLAN：AP Mode channel 1
LPR Whether to enable LPR ON
<< RFID >>
Item Description Initial value
MODULE TYPE RFID module type NONE
TAG TYPE RFID tag type NONE
RF CHANNEL RFID channel setting AUTO
RETRY POSITION RFID adjustment for retry +00mm
RETRY LABELS Max. number of RFID issue retries 3 labels
READ RETRY Max. number of RFID read retries 5 times
RFID read retry timeout 4.0 sec.
WRITE RETRY Max. number of RFID write retries 5 times
RFID write retry timeout 2.0 sec.
POWER LEVEL Radio intensity level 251
Q VALUE RFID module Q value 0
AGC THRESHOLD RFID AGC threshold setting 0