5. SYSTEM MODE EM18-33031
5.5 SET PARAMETERS
5-34
5.5.17 PEEL OFF STATUS
・ OFF Disabled
・ ON Enabled
5.5.18 KANJI CODE
・ TYPE1:Windows: Windows code
・ TYPE2:Original: Original code
5.5.19 EURO CODE
Max.
value
Min. value Step Display Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
0xFF 0x20 1 Hex. None 2 0 None h
5.5.20 MAXICODE SPEC
・ TYPE1:Compatible: Compatible with the current version
・ TYPE2: Special Spec Special specification
NOTE: The mode specified by the command may be different from the actual mode, depending on the
status of this parameter. Also, the data transmission method differs partly.
For details, refer to the B-EX Series External Equipment Interface Specification.