Toshiba B-EX6 Series - 3.4 Removing the Operation Panel

3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT EO18-33031
/MAINTENANCE
3.4 REMOVING THE OPERATION PANEL
3- 5
3.4 REMOVING THE OPERATION PANEL
1) Open the top cover. (Refer to section 3.1.)
2) Remove the side panel (L) from the printer. (Refer to section 3.2.)
3) Fully open the top cover, otherwise the operation panel ass’y is stuck on the tab and cannot be
removed from the printer.
4) Push the operation panel ass’y out through the top hooks direction.
5) Lift the operation panel ass’y to release the bottom hook, and then remove the operation panel ass’y by
moving it forward.
Top Cover
Operation Panel Ass’y
Tab
Hooks
Hooks