5. SYSTEM MODE EM18-33031
5.14 BASIC
5-86
5.14 BASIC
Contents of BASIC menu
Menu item
<11>BASIC
BASIC
FILE MAINTENANCE
TRACE
SYSTEM PROGRAM
5.14.1 BASIC
・ OFF
・ ON
5.14.2 FILE MAINTENANCE
The block numbers and BASIC program file names (up to 12 characters) stored in the BASIC program
storage area are displayed. If the file name exceeds 12 characters, the overflowing characters are not
displayed.
When no file is stored, Place of the file name is displayed with a hyphen (-).(-) is
5.14.3 TRACE
・ OFF
・ ON
5.14.4 SYSTEM PROGRAM
The printer changes the mode to execute the BASIC program.
To Next Page
Loading...
