Toshiba B-EX6 Series - 6. User System Mode Operations; 6.1 Outline of User System Mode

6. USER SYSTEM MODE EM18-33031
6.1 OUTLINE OF USER SYSTEM MODE
6-1
6. USER SYSTEM MODE
6.1 OUTLINE OF USER SYSTEM MODE
1. The printer enters the user system mode with the following operations.
 While the printer is in pause state, perform either of the following operations:
・ Hold down the [RESTART] key for 3 sec. or more.
・ Hold down the [MODE] key for 3 sec. or more.
 While the printer is online, perform the following operation:
・ Hold down the [MODE] key for 3 sec. or more.
2. The user system mode is intended for performing various parameter settings.
3. The key operations for the user system mode are described below.
Top screen of user system mode
Display
USER SYSTEM MODE C1.6
▲
<2>SET PARAMETERS
<4>SYSTEM TOOLS
▼
<1>EXIT
<3>DETECTION LEVEL
Top menu list
English
<1>EXIT
<2>SET PARAMETERS
<3>DETECTION LEVEL
<4>SYSTEM TOOLS
<5>SHOW ISSUE CONDITION
<6>RESET
Outline of the top menu
<1>EXIT Used to return the printer to online state. (The printer is not reset.)
<2>SET PARAMETERS Used to set the parameters for each printer function.
<3>DETECTION LEVEL Used to set the thershold value.
<4>SYSTEM TOOLS Used to print data sent from the host or store it in USB memory.
<5>SHOW ISSUE CONDITION Used to display the print conditions (such as sensor type, print speed and
orientation).
<6>RESET Used to reset the printer.
6.2 EXIT
The printer state is returned from the user system mode to the online mode. (No reset is performed.)
Some parameter settings are reset when the Exit is performed. The parameters to be reset are indicated
with “Reset Req.”. Other parameters are not reset.
Contents of EXIT menu
Menu item
<1>EXIT