Toshiba B-EX6 Series - 3.3 Opening and Closing the Printer Block

3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT EO18-33031
/MAINTENANCE
3.3 OPENING/CLOSING THE PRINTER BLOCK
3- 4
3.3 OPENING/CLOSING THE PRINTER BLOCK
1) Open the top cover.
2) Turn the head lever counterclockwise to FREE position.
3) Open the print head block holder plate.
4) Raise the print head block until it stops.
NOTE: DO NOT excessively push down the print head block to close it. Dosing so may cause a failure of
the print head block or damage to the print head.
Head Lever
Standard Lock Position
FREE position
Print Head Block
Holder Plate
Print Head Block