Toshiba B-EX6 Series User Manual

5. SYSTEM MODE EM18-33031
5.13 FACTORY TEST
5-82
5.13 FACTORY TEST
Contents of FACTORY TEST menu
Menu item
<10>FACTORY TEST
HEAD UP ADJUST
PANEL TEST
KEY TEST
5.13.1 HEAD UP ADJUST
The head-up solenoid is turned on for 10 seconds.
5.13.2 PANEL TEST
The LCD test is performed in the following order.
(Start)  Backlight test  Missing dot test  Character display test  Contrast test  (End)
The display language is English regardless of the LCD Language parameter setting.
LCD
Operation and LCD/LED status
Backlight test ONLINE LED turns on.
ERROR LED turns on.
Backlight turns on.
Press any key.
ONLINE LED turns on.
ERROR LED turns on.
Backlight turns off.
Press any key.
Missing dot test
ONLINE LED turns on.
ERROR LED turns on.
Backlight turns on.
1-dot line is displayed along the edges of the
LCD.
Press any key.
ONLINE LED turns on.
ERROR LED turns on.
Backlight turns on.
All LCD dots are on.
Press any key.
ONLINE LED turns on.
ERROR LED turns on.
Backlight turns on.
All LCD dots are off.
Press any key.

Toshiba B-EX6 Series Specifications

General

Brand	Toshiba
Model	B-EX6 Series
Category	Barcode Reader
Language	English