Toshiba B-EX6 Series - 4.1 Disc Cutter Installation

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.1 DISC CUTTER (B-EX206-QM-R)
4- 2
4.1 DISC CUTTER (B-EX206-QM-R)
All the following parts are supplied with the kit. Make sure you have all items shown below.
Cutter Unit (1 pc.) Paper Guide for B-EX6T3(1pc.) Inspection Paper (4pcs)
Cord bush (1 pc.)
M-4x6 Screw (2 pcs.)
ST-3x6 Screw (1 pc.)
Cable Clamp (1 pc.) Installation Manual (1 copy)