Toshiba B-EX6 Series - 15.10 Pinch Roller Upper Assembly Replacement

15. MAJOR UNIT REPLACEMENT EM18-33031
15.10 PINCH ROLLER UPPER ASS’Y
15-22
15.10 PINCH ROLLER UPPER ASS’Y
1) Open the top cover. (Refer to Section 3.1.)
2) Open the print head block.
3) Remove the SMW-3x6 screw to remove the pinch roller side plate.
4) Remove the three SMW-4x8 screws to detach the pinch roller cover.
Pinch Roller Cover
Pinch Roller Side Plate
SMW-3x6 Screw
SNW-4x8 Screw
SNW-4x8 Screw
(View from under the pinch roller upper ass’y)