Toshiba B-EX6 Series - Rear Ribbon Motor; Normal Torque; Low Torque; Ribbon Width

5. SYSTEM MODE EM18-33031
5.5 SET PARAMETERS
5-43
5.5.30 REAR RIBBON MOTOR
The menu structure of REAR RIBBON MOTOR menu
Menu item
<2>SET PARAMETERS
REAR RIBBON MOTOR
Normal Torque
Low Torque
5.5.30.1 Normal Torque
Max.
value
Min. value Step Display Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
+10 -15 1 Decimal Exist 2 0 None Step
NOTES:
1. The fine adjustment value is not effective for the reverse rotation.
2. The fine adjustment value for the ribbon supply motor is applicable to every print speed.
Print speed All print speeds
Fine adjustment value -15 to +10
3. The ribbon motor torque fine adjustment value is the sum of the fine adjustment values set in the system
mode (by key operation) and set by command (from the PC). The max. value is -15 or +10.
5.5.30.2 Low Torque
Max.
value
Min. value Step Display Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
+10 -15 1 Decimal Exist 2 0 None Step
NOTES:
1. The fine adjustment value is not effective for the reverse rotation.
2. The fine adjustment value for the ribbon supply motor is applicable to every print speed.
Print speed All print speeds
Fine adjustment value -15 to +10
3. The ribbon motor torque fine adjustment value is the sum of the fine adjustment values set in the system
mode (by key operation) and set by command (from the PC). The max. value is -15 or +10.
5.5.31 Ribbon Width
・ NORM: Normal
 rsv1: (Reserved1)
 rsv2: (Reserved2)
 rsv3: (Reserved3)
 rsv4: (Reserved4)
 rsv5: (Reserved5)
 rsv6: (Reserved6)
 rsv7: (Reserved7)
 rsv8: (Reserved8)
 rsv9: (Reserved9)