Toshiba B-EX6 Series - 12. Initial Setting Wizard

12. INITIAL SETTING WIZARD EM18-33031
12. INITIAL SETTING WIZARD
12-1
12. INITIAL SETTING WIZARD
Only when the printer is started for the first time after clears a parameter, the initial setting wizard is
started. This wizard enables setting the basic parameters, such as the LCD language and print mode,
required for various printer settings. The values set with this wizard can be modified in the system
mode and by commands.
Example of the Initial Setting Wizard Operation
RAM clear with QM type
selected
1． Clears a parameter.
QM TYPE
CLEAR...
↓
QM TYPE
COMPLETED
Turn off the printer
↓ Power OFF/ON
B-EX Series
Initializing...
↓
2．The initial setting wizard is
started.
STARTUP SETTINGS
PRESS ENTER
↓ [ENTER] key
3． Select a language.
LANGUAGE ENGLISH
▲
ENGLISH
GERMAN
▼
Select ENTER：Set
FRENCH
Choose an option with the
[UP] or [DOWN] key.
↓ [ENTER] key
4． Print mode
PRINT MODE w/ RIBBON
▲
With RIBBON
Without RIBBON
▼
Select ENTER：Set
Choose an option with the
[UP] or [DOWN] key.
↓ [ENTER] key
5． Select a calibration type.
CALIBRATE OFF
▲
OFF
LABEL/GAP
▼
Select ENTER：Set
BLACK MARK
Choose an option with the
[UP] or [DOWN] key.
6.-1 When an option other than “OFF” is selected for CALIBRATE