Toshiba B-EX6 Series - 11.4 Sensor Adjustment Screen

11. DISPLAY PATTERN AND KEY OPERATION FOR SYSTEM MODE AND USER SYSTEM MODE EM18-33031
11.4 SENSOR ADJUSTMENT SCREEN
11-9
11.4 SENSOR ADJUSTMENT SCREEN
The sensor adjustment screen is used only when the level of the media sensors on the printer is required
to be adjusted.
It is comprised with the following:
Display example
REFLECTIVE SENSOR
4.3V
Set a blank label
[ENTER] for 3sec
Display
Before adjustment
REFLECTIVE SENSOR
4.3V
Set a blank label
[ENTER] for 3sec
After adjustment
REFLECTIVE SENSOR
4.5V *
Adjust Complete
Key function (before adjustment)
Key Substitute Key Function
[MODE] None Displays the top menu.
[CANCEL] None Displays the upper-level menu.
[ENTER] None When held down for 3 seconds or more, the sensor adjustment
is performed.
When this key is released within 3 seconds, the screen returns
to the upper-level menu.
[UP] None No function
[DOWN] None No function
[LEFT] None No function
[RIGHT] None No function
Key function (after adjustment)
Key Substitute Key Function
[MODE] None Displays the top menu.
[CANCEL] None Displays re-adjustment menu.
[ENTER] None Displays the upper-level menu.
[UP] None No function
[DOWN] None No function
[LEFT] None No function
[RIGHT] None No function
Sensor level
Message
Title