4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.1 DISC CUTTER (B-EX206-QM-R)
4- 5
4.1.1 Removing the Covers
1. Turn the printer power off and disconnect the Power Cord.
2. Remove the three B-4x5 screws from the Side Panel (L).
3. Slide the Side Panel (L) backward, and raise it to remove from the printer.
4. Fully open the Top Cover.
5. Release the tab on the right end by pushing it, then remove the Front Panel (Right).
B-4x5 Screw
Side Panel (L)
B-4x5 Screw
Top Cover
Tab
Front Panel (Right)
To Next Page
Loading...
