4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.4 EXPANSION I/O INTERFACE BOARD (B-EX700-IO-QM-R)
4-26
6. Connect the Interface Cable to J3 on the Main PC Board.
7. Re-install the Side Panel (L).
8. Refer to Section 5.9.5 EXP. I/O to select the operating mode.
9. Perform a loop back test to confirm the expansion I/O board functions properly.
J3
Main PC Board
Interface Cable
Expansion I/O Board
To Next Page
Loading...
