Toshiba B-EX6 Series - Page 46

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.5 Wireless LAN BOARD (B-EX700-WLAN2-QM-R)
4-29
5. Fit the Wireless LAN card slot into the slot from the inside, and secure it with the two M-3x6 screws
from the outside, as shown below.
6. Attach the Antenna Cover to the printer back with the two M-3x6 screws, as shown below.
7. Connect the Interface Cable to J6 on the Main PC board.
Wireless LAN Card Slot
M-3x6 Screw
M-3x6 Screw
M-3x6 Screw
M-3x6 Screw
J6
Main PC Board
Interface Cable
A
ntenna Cover